DVR adapter 12V 5A Power Supply Adapter for Monitor, DVR, NVR, LED, Camera,
Dvr adapter for dvr, xvr, nvr, led tv, monitor, dvr power adapter dvr power supply 12v,
- Power parameters and other instructions:
- Universal power adapter, switching power supply transformer
- Selective attention to the power supply, you need to follow to select the voltage consistent current is equal to or higher than the required current power
- Input voltage (INPUT): 100-240V 50-60Hz
- Output voltage (OUTPUT): DC12V 5A
- Power (maximum output power): 60 W
- Polarity: inside is positive, outside is negative
- Plug: car cigarette lighter Special: You can run 4 CCTV cameras with this power adapter.
High quality cctv adapter use for any indoor and outdoor place, normally in Bangladesh market there are may cctv adapter available but every adapter are not quality. normally adapter is life of cctv when adapter is damage camera does not working. so long time service and cctv camera are active you can consider quality outdoor cctv power adapter
DVR adapter, dvr power adapter,dvr power supply 12v, hikvision dvr adapter
NVR DVR ADAPTER
|
Model |
PA1 |
|
DC12V1A |
|
|
Power input |
AC100-220V 50~60HZ |
|
2.1*5.5mm |
|
|
AC Plug |
USA/European/UK/optional |
|
Ripple and noise |
<1% |
|
Overload protection |
105%~150% rated power |
|
Voltage accuracy |
±5% |
|
Short Circuit Protection: |
support |
|
DC Cable |
1.15M |
|
working environment |
0℃~45℃ 10%~90%RH |
|
warranty period |
2 years |
|
Color |
black |
|
Waterproof |
No |
|
Weight |
0.07KG |
|
Size |
10*5*7cm |
12V DC 5 Amp Power supplies provide a lot of current and are used mainly to power Security DVR Recorders and multiple cameras. When being used to power multiple cameras a 1 to 4 DC Power Splitter can be used. If you use the power splitter, the current is split in to 4 cameras and is sufficient to power CCTV cameras with up to 42 IR LEDs up to 100ft away.
Another reason for using a 5 amp 12V DC power supply is when you have a 1 amp consumption camera located more than 300 feet away, you will need more current from the power source to account for amperage and voltage loss as the current travels the length of wire. Depending on the camera’s power consumption, a 5 amp power supply may work.
Please note that if you intend to use this power adapter with a camera or device not purchased from Computercitybd.com, be sure to check the power input specifications of your device.
Reviews
There are no reviews yet.